---------------------
Version Information
---------------------
----------------------------
Silent Installation Command 
----------------------------
Run "setup.exe /s /f2<path\LogFile>"
i.e. setup.exe /s /f2c:\mylog.log

-------------------------------
Silent Uninstallation Command
-------------------------------
Run "setup.exe /removeonly /s /f1<path\usetup.iss> /f2<path\LogFile>"
i.e. setup.exe /removeonly /s /f1c:\usetup.iss /f2c:\mylog.log

--------------------
Support Languages
--------------------
Arabic, Arabic Lebanon, Arabic Saudi Arabia
Basque, Brazilian, Bulgarian, Catalan
Chinese-Traditional-HK, Chinese-Simplified, Chinese-Traditional-TW
Croatian, Czech, Danish, Dutch
English, English-Euro, Estonian, Finnish
French, French/Canadian, German, Greek
Hebrew, Hungarian, Italian
Japanese, Korean, Latvian
Lithuanian, Norwegian, Polish, Portuguese
Romanian, Russian, Slovak, Slovenian
Spanish, Swedish, Thai
Turkish, Ukrainian 

--------------------
Change Histroy
--------------------
[10.0.18362.20133]
1. Update Blur algorithm
2. Fix blur issue from S4/resume
3. Decrease frame stop thread close delay time 
4. Support KSPROPERTY_CAMERACONTROL_EXTENDED_ISO_ADVANCED property
5. Add customized settings for 5986/116A

[10.0.18362.20132]
1.Fix ESD issue for some projects

[10.0.18362.20131]
1. Support TSP 3.9 and TSP 4.0 spec
2. Add customized settings for 04F2/B6EA, 04F2/B6EB and 5986/114D
3. Add "F4CN" BIOS ID for TSP function
4. Support focus polling state
5. Update Blur Alforithm to fix crash issue

[10.0.18362.20130]
1. Modify focus behavior
2. Fix blur issue for 04F2/B6CB/REV_7618
3. Add customized settings for 13D3/5426

[10.0.18362.20129]
1. Resolve flash image issue with Face Tracking function
2. Speed up Face Tracking speed and change the ratio 
3. Add 0408/5322 and 5986/113F in driver INF files

[10.0.18362.20128]
1. Default enable WPP log
2. Add some customized settings for 174F/180B, 0BDA/5613 and 174F/1809
3. Transfer MJPEG to RGB for some projects

[10.0.18362.20127]
1. implement Focus state property
2. Add some workaorund for 04F2/B6CB

[10.0.18362.20126]
2. Change ratio of face for face tracking

[10.0.18362.20125]
1. Update Blur algorithm
2. Change ratio of face for face tracking
3. Add some customized settings for 13D3/5411
4. Set auto mode if recevie continue for focus control

[10.0.18362.20124]
1. Fix preview hand issue if unplug camera device
2. Change the behavior of the BgBlur settings 
3. Remove 04F2/B6AB
4. Add customized settings for 2EF4/4944

[10.0.18362.20123]
1. Add WPP driver log
2. Add customized settings for 04F2/B6D4
3. Update blur algorithm

[10.0.18362.20122]
1. Add customized settings for 0BDA/5612, 0BDA/5613 and 174F/243F
2. Update Blur algorithm

[10.0.18362.20121]
1. Disable ROI for 174F/244D
2. Support TSP 3.8
3. Add some customized settings for 04F2/B6DF

[10.0.18362.20120]
1. Add customized settings for 5986/1165, 174F/244D
2. Support TSP 3.6 spec
3. Update Blur algorithm

[10.0.18362.20119]
1. Remove 0BDA/5540 and 04F2/B6D7
2. Add some customized settings for 5986/1164 and 04F2B68C
3. Fix RGB24 format disappear issue for some projects
4. Fix debug message issue

[10.0.18362.20118]
1. Add L8ToYUY2 for 0408/70A0
2. Update privacy picture for some projects
3. Update BG blur algorithm
4. Fix memory leak issue for slim HD modules
5. Update restart marker method
6. Add BIOS Id "DHCN", "DMCN", and "DNCN" to support BG blure function
7. Speed up on/off for Face tracking

[10.0.18362.20117]
1. Add supporting ISO function
2. Add GPIO control FaceTracking for 174F/1809
3. Add customized settings for 5986/1163, 13D3/5419, and 13D3/5405
4. Enable Dshow bridge for some projects

[10.0.18362.20116]
1. Fix extension unit control issue
2. Add some customized settings for 5986/1143 and 174F/244D

[10.0.18362.20115]
1. Fix blur crash issue
2. Fix anti-flicker current value issue when initialize
3. Add some customized settings for 5986/1162, 6986/115F and 04F2/B568

[10.0.18362.20114]
1. Add customized settings for 04F2/B6D9, 30C9/001A, 30C9/001B, 174F/244D and 174F/244E


[10.0.18362.20113]
1. Add BIOS ID DJCN, DSCN, and DTCN for TSP function 
2. Add customized settings for 04F2/B6D7 and 04F2/B6AB

[10.0.18362.20112]
1. Improve some performance for 1080P
2. Add some customized settings for 0BDA/5677
3. Keep FW powerline default value for some projects
4. Implement TSP 3.4 spec
5. Add customized settings for 0408/5440, 0408/0441 and 04F2/B6A4
6. Add customized settings for 04F2/B6D0, 30CA/0014 and 30CA/0015
7. Fix inf issues for 174F/118B, 117F/118C, and 174F/118D

[10.0.18362.20111]
1. Add customized settings for 04F2/B6D3
2. Change default power line settings for some projects

[10.0.18362.20110]
1.Fix rotate issue with HDR enable for 04F2/B616
2.Add customized settings for 04F2/B6C6, 05C8/03DD
3.Enable Dshow bridge for 04F2/B6C6 and 04F2/B6A3
4.Add customized settings for 174F/244B, 174F/144C and 04F2/B6D5

[10.0.18362.20109]
1. Add customized settings for 04F2/B6BE and 2EF4/4944
2. Add customized settings for 04F2/B6BF, 0408/5347 and 0408/5346
3. Add customized settings for 30C9/0011, 0408/5374 and 0408/5375

[10.0.18362.20108]
1. Remove RGB24 and enable MJPEG to YUV for 04F2/B616 
2. Add customized setting for 04F2/B6CE
2. Enable Dshow bridge setting for 04F2/B65A, 04F2/B67A, 5986/069E, and 5986/1147

[10.0.18362.20107]
1.Implement TSP 3.2 spec
2. Add BIOS ID "CJCN"
3. Add customized settings for 04F2/B6C1, 04F2/B6C2 and 04F2/B6CB
4. Add customized settings for 13D3/5403 and 0408/3070

[10.0.18362.20106]
1. Add customized setting for 13D3/5405 and 13D3/5406
2. Add auto flicker saved registry key in begining for some projects

[10.0.18362.20105]
1. Add some BIOS IDs for TSP 3.1 spec
2. Modify SW de-flicker timer
3. Add some customized setting for 174F/118D, 174F/243E
4. Modify face tracking behavior
5. Remove Group ID/Name for 05C8/0700
6. Fix blur issue when face is fixed
7. Fix unlock screen fail issue after open Vantage APP


[10.0.18362.20104]
1. Add some BIOS ID for TSP2.7 spec
2. Add custimozed settings for 5986/115F

[10.0.18362.20103]
1. Add BIOS ID "CX"
2. Add customized settings for 5986/115D, 5986/115E, 174F/118B, 174F/118C

[10.0.18362.20102]
1. Add customized setting for 0BDA/5540 
2. Fix lag issue for SW auto flicker
3. Enable SW auto for some projects

[10.0.18362.20101]
1. Add customized setting for 04F2/B6B7

[10.0.18362.20100]
1. Fix crash issue for two RGB camera project
2. Add customized setting for 174F/243F

[10.0.18362.20099]
1. Add customize setting for 174F/1805
2. Decrease close stream delay for Vantage APP issue
3. Enable Face tracking function for 174F/1790
4. Add BIOS ID "BY" and "BQ" to support blur function

[10.0.18362.20098]
1. Add customized settings for 5986/115B and 5986/115C
2. Change customized settings  for 5986/113F and 04F2/B604
3. Add BIOS ID "CL" to support Blur function
4. Try to fix IR LED issue with privacy(also need FW update)
5. Fix image lag issue with ECP function 


[10.0.18362.20097]
1. Add customized settings for 13D3/56FB and 13D3/56FD
2. Add customized settings for 0BDA/5668, 04F2B6AF and 04F2/B6B0
3. Try to fix IR LED issue with privacy(also need FW update)

[10.0.18362.20096]
1.Fix AE/ROI issue for 13D3/5619
2.Try to fix flush image issue for 04F2/B604
3.Enable TSP 2.6 for some BIOS IDs

[10.0.17763.20095]
1.Enable Face tracking for VID/PID = 174F|1790
2.Change AE full size window for some projects
3.Fix IR LED off issue for some projects
4.Add profile for some projects
5.Fix crash issue for LEi project

[10.0.17763.20094]
1.add customized settings for VID/PID = 0408|3090
2.add function of auto flicker

[10.0.17763.20093]
1.add customized settings for VID/PID = 04CA|7074,04F2|B679,04F2|B6A9
2.Modify drop frame behavior

[10.0.17763.20092]
1.modify the way to create mediatype
2.fix the issure that face detect stop that caused by a deadlock
3.update ECP function form new ECP Spec
4.add customized settings for VID/PID = 5986|115A

[10.0.17763.20091]
1.fix the issure that can not preview in skype for business

[10.0.17763.20090]
1.fix the issure that privacy icon do not show in metro ap
2.fix the issure that color enable

[10.0.17763.20089]
1.fix the issure that blur function failure because there is no face
2.update blur algorithm
3.disable gain control for 5986|114E

[10.0.17763.20088]
1.reduce cpu loading when open FaceDetect 
2.update blur algorithm

[10.0.17763.20087]
1.add customized settings for VID/PID = 0BDA|5677¡¢04F2|B6A8¡¢04F2|B6A6
2.update blur algorithm
3.make jpeg to yuv and rgb when enable blur

[10.0.17763.20085]
1.fix the issure that preview will hang up when plug the power supply again
2.support AWB control for 13D3|5815

[10.0.17763.20084]
1.fix the issure that DrawFaceROI always open

[10.0.17763.20083]
1.fix the issure that would produce flowers screen when swtich resolutioin
2.update blur algorithm
3.Add Blur & FaceROI video processor

[10.0.17763.20082]
1.update blur algorithm
2.set power lower limit value to twenty two percent
3.add customized settings for VID/PID = 04F2|B690

[10.0.17763.20081]
1.fix the issure of functional conflict between blur and zoom
2.support the function that stop blur when power power is less than twenty percent
3.add customized settings for VID/PID = 0EDC|3080¡¢04F2|B59E
3.add customized settings for VID/PID = 04F2|B59D¡¢04F2|B676

[10.0.17763.20080]
1.update blur algorithm 

[10.0.17763.20079]
1.update blur algorithm 
2.fix the issure that preview will hang when repeatedly plug

[10.0.17763.20078]
1.add customized settings for VID/PID = 13D3|56D7¡¢04F2|B689¡¢04F2|B5E8
2.add customized settings for VID/PID = 04F2|B65F¡¢04F2|B5FE
3.fix the issure blur is not clear that caused by drop frames

[10.0.17763.20077]
1.add customized settings for VID/PID = 2EF4|4665¡¢5986|1157
2.fix the issure that can not preview when less than 30 fps
3.fix the issure of blur memory

[10.0.17763.20076]
1.add customized settings for VID/PID = 174F|1803¡¢174F|177C¡¢174F|2439
2.add customized settings for VID/PID = 13D3|5266¡¢13D3|5268¡¢5986|1158
3.fix the issure of lag for FHD resolution

[10.0.17763.20075]
1.fix the issure that auto check not disable for pan/tilt/zoom/roll
2.update blur algorithm 
3.add customized settings for VID/PID = 174F|118A

[10.0.17763.20073]
1.fix the issure of color enable
2.add bios id for ECP

[10.0.17763.20072]
1.fix the issure that IR device cant not do window hello

[10.0.17763.20071]
1.update special privacy image
2.update blur algorithm 

[10.0.17763.20070]
1.fix the issure that face detect can not work in recording mode
2.change customized settings for auto flicker modules

[10.0.17763.20069]
1.add customized settings for VID/PID = 04CA|B69F
2.update blur algorithm

[10.0.17763.20068]
1.add customized settings for VID/PID = 04CA|707A
2.fix the issure of IR Led off when relogin
3.fix the issure of abnormal privacy image for 720p

[10.0.17763.20067]
1.add fuction that support speciao privacy image
2.fix flicker issue for SUB_VGA if saved registry is empty
3.add support RTK_EXT_PRIVACY_ENABLE_CTL

[10.0.17763.20066]
1.fix the HLK issure of FaceAuthMode
2.Fix flicker issue for SUB_VGA

[10.0.17763.20065]
1.fix the HLK of 5849 IR for FaceAuth mode
2.update blur algorithm

[10.0.17763.20064]
1.update blur algorithm
2.fix the issure that can not preview for 5849 module

[10.0.17763.20063]
1.fix the HLK issure of torch mode
2.diable still pin for VID/PID = 04F2|B604

[10.0.17134.20062]
1.add BIOS list for Blur Control

[10.0.17134.20061]
1.fix the privacy issure
2.fix the issure of face Detect

[10.0.17134.20060]
1.add customized settings for VID/PID = 5986|1121
2.fix the issure of lag for face detect

[10.0.17134.20059]
1.add customized settings for VID/PID = 04F2|B698

[10.0.17134.20058]
1.fix the HLK issure of 5849 IR
2.add customized settings for VID/PID = 2FEE|1024

[10.0.17134.20057]
1.fix the issure of color enable on RS5
2.fix the HLK issure of powerline
3.fix the issure of ECP

[10.0.17134.20056]
1.add customized settings for VID/PID = 0BDA|5786
2.add customized settings for VID/PID = 04F2|B5EB
3.fix the issure of color enable in Property 
4.add function for get hardware URL in updated OS
5.support blur control for mode

[10.0.17134.20055]
1.fix the issure of ECP that not show icon
2.add customized settings for VID/PID = 2EF4|4742
3.add customized settings for VID/PID = 05C8|0704

[10.0.17134.20054]
1.fix the issure of format change in Amcap
2.add customized settings for VID/PID = 5986|1155
3.add customized settings for VID/PID = 05C8|0822
4.add customized settings for VID/PID = 05C8|0823

[10.0.17134.20053]
1.disable face AE for default

[10.0.17134.20052]
1.fix the issure of change format for YUY2RGB24

[10.0.17134.20051]
1.fix the issure of ECP when restart preview in shutter mode

[10.0.17134.20050]
1.fix the issure of change format
2.add customized settings for VID/PID = 5986/114B
3.remove restore function for VID/PID = 04F2/B674
4.add R10E for ECP

[10.0.17134.20049]
1.fix the issure that hang up when change between start and stop in preview
2.add customized settings for VID/PID = 04CA/709C

[10.0.17134.20048]
1.add customized settings for VID/PID = 04F2/B688
2.enable rotate function for VID/PID = 04F2/B570
3.fix the issure of focus infinity mode

[10.0.17134.20047]
1.fix the issure of handle leaked
2.fix the issure that stack will corruption in RestoreControl
3.remove AWB for 5986/1137 and 5986/1143
4.keep auto and disable for VGA modules
5.add optimize of face ROI coordinates that getted from UWP API
6.add customized settings for VID/PID = 04F2/B681

[10.0.17134.20046]
1.fix the issure that resolution will disorderly jump when preview
2.diable RGB24 for VID/PID = 5986/1137,5986/1143

[10.0.17134.20045]
1.optimize ECP polling time
2.add customized settings for VID/PID = 0BDA/5788
3.add customized settings for VID/PID = 174F/1800
4.add customized settings for VID/PID = 174F/1801

[10.0.17134.20044]
1.remove Shutter speed for 5986/1137 and 5986/1143
2.fix the HLK issure of FaceAuthMode

[10.0.17134.20043]
1.fix the issure that hang up when Enroll

[10.0.17134.20042]
1.fix the issure that pan/tilt/zoom not fuction for still pin
2.optimize face ROI coordinates that getted from UWP API
3.fix the issure that LED not close when close AP
4.disable shutter mode to on when exposure in manual mode

[10.0.17134.20041]
1.fix the issure of can't keep auto for deflicker when restore from sleep
2.add customized settings for VID/PID = 04F2/B67C

[10.0.17134.20040]
1.fix the issure of can't preview for 340x340 privacy image
2.add pan/tilt/zoom for 04CA/7078 and 04f2/B62F
3.add flip/mirror for 13D3/5755 and 04f2/6969

[10.0.17134.20039]
1.add pan/tilt/zoom for 5986/1120
2.support the function of WhiteBalance
3.support the function of Exposure

[10.0.16299.20038]
1.add pan/tilt/zoom for 0BDA/562B
2.remove pan/tilt/zoom for 04CA/7078 and 04f2/B62F

[10.0.16299.20037]
1.fix the issure of privacy off when restart preview

[10.0.16299.20036]
1.fix the issure of ECP privacy when in shutter on mode
2.fix the issure that cant't preivew for VGA modules

[10.0.16299.20035]
1.fix the issure of event Processing mechanism

[10.0.16299.20034]
1.surport function of scene mode
2.fix the issure of focus auto mode

[10.0.16299.20033]
1.fix the issure of preview hang up when switch framing grid mode
2.fix the issure of jitter of focus manual mode
3.fix the issure of ECP

[10.0.16299.20032]
1.fix the issure of take photo when enable privacy
2.support the function set Def value 60 for Saturation

[10.0.16299.20031]
1.fix the issure of take photo when enable privacy
2.fix the issure of value flipMirror
3.support the function set Def value 6 for HUE

[10.0.16299.20030]
1.update blur algorithm
2.add blacklist for ROI control

[10.0.16299.20029]
1.enable Roll for 13D3/5755,O4F2/6969
2.add blacklist for tnr
3.set defaut 50 for auto Flicker
4.fix the issure of focus mode

[10.0.16299.20028]
1.fix the issure of focus mode
2.support special process for VGA modules
3.fix the issure for front HD RGB camera

[10.0.16299.20027]
1.fix the HLK issure of focus mode
2.fix the issure of can not enroll
3.fix the issure of RGB24

[10.0.16299.20026]
1.fix the error of garbage caused by RestartMarker
2.remove the N1ZE from ECP support list

[10.0.16299.20025]
1.support function of torch mode
2.fix the error of property save function
3.convert special format for IR solution(340x374)

[10.0.16299.20024]
1.set auto for powerline when first connect camera
2.support the function of property save
3.support touch af
4.cancle group ID for OBDA/562B,O4F2/B616,5986/113D,174F/1D02,04CA/7074

[10.0.16299.20023]
1.fix the issure of hang when connect USB camera
2.increase the condition for Run ECP
3.update package
4.support IR LED tag 13 for tobii

[10.0.16299.20022]
1.update tnr
2.fix the issure of RGB24
3.support function of Flash LED

[10.0.16299.20021]
1.fix the issure that resolution shows negative for RGB24
2.support fuction of color enable

[10.0.16299.20020]
1.fix the HLK issure for ROI control

[10.0.16299.20019]
1.fix the issure of caton for ECP
2.fix the HLK issure for IR camera

[10.0.16299.20018]
1.fix the issure that shadow of the residual in preview when privacy enable

[10.0.16299.20017]
1.fix the issure of preview lag for tnr

[10.0.16299.20016]
1.fix the issure of RGB24 output
2.fix the issure of still pin take photo
3.support fuction of face AE

[10.0.16299.20015]
1.support fuction of privacy cover mode 
2.support fuction of rotate and flipMirror
3.fix the issure that IR Camera can not enroll

[10.0.15063.20014]
1.support fuction of privacy
2.support fuction of tnr
3.support fuction of autoFlicker

[10.0.15063.20013]
1.support RGB24 and Jpeg format Convert for RGB
2.support fuction of pan/tilt/room

[10.0.15063.20012]
1.support RGB and IR for DCHU