‪©Copyright 2008-2012 Marvell®.‬
All rights reserved.

setup_0409.htm created 2012-01-25

Readme File for SETUP.exe

Supporting: Marvell Yukon Ethernet Controller

This package contains the following software components:

- NDIS5.1 Miniport Driver version 11.45.3.3 for Windows XP (32 bit)
- NDIS5.1 Miniport Driver version 11.45.3.3 for Windows XP (64 bit)
- NDIS6 Miniport Driver version 11.45.3.3 for Windows Vista (32 bit)
- NDIS6 Miniport Driver version 11.45.3.3 for Windows Vista (64 bit)
- NDIS6.2 Miniport Driver version 11.45.3.3 for Windows 7 (32 bit)
- NDIS6.2 Miniport Driver version 11.45.3.3 for Windows 7 (64 bit)

This file contains




1  Overview

The driver installation package contains the Marvell NDIS Miniport Driver for the
Marvell Yukon Ethernet Controller.

This README file explains how to install the driver installation package on a
system running one of the following operating systems:

Windows XP (x86), Windows XP (x64), Windows Vista (x86), Windows Vista (x64),
Windows 7 (x86), Windows 7 (x64)

2  Required Files

To install the driver, the following file is required:

    setup.exe

3  Installation

On plug & play Windows versions, the adapter is found, identified, and configured
automatically. Cancel all operating system attempts to install the driver
automatically.

NOTE: To install the driver, you must be logged in as 
      a user with administrative rights.
3.1  Driver Installation
setup.exe
3.2  Silent Installation
To install the driver silently, execute the following commands:
setup.exe /S /LOG=%WINDIR%\YukonInstall.log
3.3  Driver Removal
setup.exe /REMOVE=ALL
3.4  Silent Removal
setup.exe /S /LOG=%WINDIR%\YukonInstall.log /REMOVE=ALL
3.5  Driver Extraction
The installer can be used to extract all included Windows drivers for the
supported Windows operating systems to a directory.
Extraction of the drivers to the path where setup.exe resides:
setup.exe /E
Extraction of the drivers to the path which was given:
setup.exe /E=<extraction path>

4  Further Options

By default, the installation directory is "%PROGRAMFILES%\Marvell\Miniport
Driver". It can be changed by setting the variable "INSTALLDIR".

Example:

setup.exe /S /LOG=%WINDIR%\YukonInstall.log /INSTALLDIR=C:\MyDir

The installation status is logged in the file "%WINDIR%\YukonInstall.log". The
log file path and name can be changed by replacing "%WINDIR%\YukonInstall.log"
with the preferred file path and name.


5  Troubleshooting

If you should encounter any problems with your driver installation package,
please re-read the instructions above and the documentation supplied with the
operating system carefully.

Additionally, refer to your system event log file (using the Event Viewer), and
check it for entries from the Marvell NDIS Miniport Driver. If your particular
problem is not listed or the error persists, please send your system event log
file to our technical support.

For further information, please contact our support.


*** End of Readme File ***